Electrical Engineer

Electrical Engineer handles the specific activities presented here and this page contains 20 real tasks to follow. Each task gives quick context about who benefits and why accuracy matters. Each one shows where we found it, and comes with an AI prompt you can copy and use straight away.

20evidenced tasks
20ready prompts
9tools of the trade
17-2071.00O*NET-SOC code
198,750hold this job (US, BLS 2025)
$120,630median pay/yr (US)
Open Electrical Engineer in the interactive atlas →

What it pays

Government survey numbers — not estimates, not ads.

Half of all Electrical Engineers in the U.S. earn more than $120,630 a year — the middle 80% land between $76,550 and $184,300. About 198,750 people in the U.S. do this work. Figures are for the U.S. occupation group “Electrical Engineers”. (U.S. Bureau of Labor Statistics survey, published 2025.) In India, Professionals earn about ₹38,298 a month on average — around ₹4.6 lakh a year (government PLFS survey via ILOSTAT, occupation-family figure).
$120,630typical pay / year
198,750people in this work
$184,300+top 10% earn
₹4.6 lakha year in India (family avg)
Think you get this job?Six quick questions on how it really works — with a hint and the reason behind every answer.
Test yourself →

The work, task by task

These are the real jobs-to-be-done, not a wish list. Each task shows where we found it, and the prompt underneath is written for that exact task.

Analysing4

Test electrical equipment and systems

+
Run the acceptance tests on the new motor control panels tomorrow, verify insulation resistance, earth…
Run the acceptance tests on the new motor control panels tomorrow, verify insulation resistance, earth continuity and protective device trips against the safety spec, record test readings, and sign off only if all readings meet legislation and procurement paperwork is complete.
The tools that do the workC++ESCOjob descriptionsO*NETWikipedia

Perform detailed calculations for system design

+
Calculate conductor sizes, voltage drop and short-circuit ratings for the new distribution board today,…
Calculate conductor sizes, voltage drop and short-circuit ratings for the new distribution board today, include load diversity and ambient temperature, produce a one-page design summary with safety margins for the procurement and installation teams.
The tools that do the workC#job descriptionsO*NET

Analyze electrical system requirements

+
Assess the building's power requirements, list peak and base loads, identify critical circuits and UPS needs,…
Assess the building's power requirements, list peak and base loads, identify critical circuits and UPS needs, estimate transformer capacity and prepare a prioritized procurement list for electrical gear to meet the tender deadline next Monday.
The tools that do the workAutodesk Revitjob descriptionsO*NET

Create circuit diagrams and models

+
Produce complete circuit diagrams and simulation models for the new motor control panel, include…
Produce complete circuit diagrams and simulation models for the new motor control panel, include IEC-compliant protective device selection, wiring schedules, and a parts list ready for procurement by Thursday; verify earthing and fault-current calculations first.
The tools that do the workAutodesk AutoCADjob descriptionsWikipedia
Negotiating1

Liaise with clients and project teams

+
Meet the client project lead and site architect on Thursday, review the single-line diagrams and installation…
Meet the client project lead and site architect on Thursday, review the single-line diagrams and installation sequence, agree who supplies the switchgear and set weekly coordination checkpoints so procurement and site teams avoid clashes.
The tools that do the workAutodesk AutoCADjob descriptionsO*NETWikipedia
Protecting1

Ensure projects meet safety standards

+
Audit the project's safety compliance file, review protective device selectivity, earthing arrangements and…
Audit the project's safety compliance file, review protective device selectivity, earthing arrangements and emergency stop logic, document any nonconformances and assign corrective actions to the site electrical foreman with a two-week deadline.
The tools that do the workEclipse IDEjob descriptionsWikipedia
The daily work14

Ensure compliance with safety legislation

+
Review the lighting and switchgear layouts, update the risk register and wiring diagrams to reflect the new…
Review the lighting and switchgear layouts, update the risk register and wiring diagrams to reflect the new panel locations, confirm clearances and earthing meet the 18th Edition and local machine-safety rules, and produce a signed compliance summary for procurement by Wednesday.
The tools that do the workAutodesk AutoCADESCOsee the evidence ↗

Use a computer

+
Review the site electrical drawings, run a parts list for transformers and main and distribution breakers,…
Review the site electrical drawings, run a parts list for transformers and main and distribution breakers, flag components that no longer meet the procurement spec, and export a bill of materials so purchasing can order compliant replacements before month end.
The tools that do the workAutodesk AutoCADESCOsee the evidence ↗

Develop electrical power generation and distribution systems

+
Design the plant-level power generation and distribution scheme for the Riverside substation project: produce…
Design the plant-level power generation and distribution scheme for the Riverside substation project: produce single-line diagrams, list transformer and switchgear ratings, confirm protective relays meet code, and produce installation notes for procurement and site electrical teams by next Wednesday.
The tools that do the workAutodesk AutoCADO*NETWikipedia

Evaluate systems and recommend repairs

+
Inspect the 25kV feeder rooms at Plant B, record voltages, thermal images, relay logs and cable insulation…
Inspect the 25kV feeder rooms at Plant B, record voltages, thermal images, relay logs and cable insulation readings, diagnose faults, and deliver a repair recommendation report with priority, cost estimate and safety precautions to maintenance and procurement by Friday.
The tools that do the workAutodesk AutoCADjob descriptionsWikipedia

Research electronic devices and systems

+
Survey candidate power converters and protection modules for the turbine control upgrade, compare datasheets…
Survey candidate power converters and protection modules for the turbine control upgrade, compare datasheets for efficiency, MTBF and compliance with IEC standards, summarise pros and cons and recommend three devices for purchasing review by Monday.
The tools that do the workDassault Systemes SolidWorksjob descriptionsWikipedia

Supervise or train project team members, as necessary.

+
Run a two-hour training session for the new project team on reading protection curves, lockout procedures and…
Run a two-hour training session for the new project team on reading protection curves, lockout procedures and cable derating; prepare the slide deck, hands-on relay test checklist and a follow-up competency quiz, and schedule the room with operations for Thursday morning.
The tools that do the workEclipse IDEO*NET

Investigate or test vendors' or competitors' products.

+
Bench-test three vendors' circuit-breaker prototypes against our trip characteristics, log opening times,…
Bench-test three vendors' circuit-breaker prototypes against our trip characteristics, log opening times, thermal rise and mechanical endurance, produce a comparative test report with pass/fail and vendor improvement requests for procurement by end of month.
The tools that do the workDassault Systemes SolidWorksO*NET

Assist in developing capital project programs for new equipment or major repairs.

+
Develop the capital program outline for replacing the ageing switchgear in Zone C: scope the equipment list,…
Develop the capital program outline for replacing the ageing switchgear in Zone C: scope the equipment list, estimate budgets by vendor class, draft phasing to avoid outages, and submit a funding request and risk matrix to the capital board in two weeks.
The tools that do the workAutodesk RevitO*NET

Develop maintenance and testing procedures

+
Write maintenance and test procedures for the 11kV switchboard at Redridge Pit: include safety isolation…
Write maintenance and test procedures for the 11kV switchboard at Redridge Pit: include safety isolation steps, required test equipment, step-by-step insulation and functional tests, acceptance criteria, permit references, and a quarterly schedule to meet the electrical safety code.
The tools that do the workLinuxjob descriptions

Oversee technicians and craftspeople

+
Prepare a fortnightly oversight plan for the site electricians and contractors on Shift B: list tasks to…
Prepare a fortnightly oversight plan for the site electricians and contractors on Shift B: list tasks to inspect, quality checkpoints, PPE and permit checks, escalation contacts for nonconformance, and a sign-off sheet for each crew lead.
The tools that do the workAutodesk AutoCADjob descriptions

Implement systems for remote operation and data transfer

+
Design the remote control and telemetry scheme for Pump Station 4: define communications links, required…
Design the remote control and telemetry scheme for Pump Station 4: define communications links, required sensors and I/O, data rates, encryption, failover behaviour, and a test plan to validate secure data transfer to the operations SCADA.
The tools that do the workC++Bashjob descriptions

Apply principles of electromagnetism and electronics

+
Create a worked example applying Maxwell and circuit laws to the main transformer: include field…
Create a worked example applying Maxwell and circuit laws to the main transformer: include field calculations, equivalent circuit, expected leakage reactance, thermal limits, and bench test measurements to confirm the model.
The tools that do the workDassault Systemes SolidWorksWikipedia

Integrate electrical components into larger systems

+
Produce an integration checklist to fit the new motor control cubicle into Conveyor Line C: specify wiring…
Produce an integration checklist to fit the new motor control cubicle into Conveyor Line C: specify wiring interfaces, control logic handshakes, earthing and bonding, cable schedules, relay interlocks, and site acceptance tests with production control.
The tools that do the workAutodesk RevitWikipedia

Supervise the procurement of mining electrical equipment

+
Run the procurement supervision for the upcoming tender of underground feeders: verify technical specs…
Run the procurement supervision for the upcoming tender of underground feeders: verify technical specs against mine code, shortlist suppliers, tabulate compliance against mandatory tests, schedule FATs, and prepare recommendation to procurement on Thursday.
The tools that do the workESRI ArcGISESCO

Says who?

These are the pages we read to build this. Open any of them and check us.

The logs, files & records this job keeps

Shared with other careers — the same record means something different in each.

Related careers

Same family of work — each with its own tasks and prompts.

The LLOS Work Atlas is the world's largest evidenced task library — a map of human work, with a ready prompt behind every task. 1,774 careers · every task named by the sources that witnessed it — O*NET, ESCO, real job descriptions, Wikipedia — and the deepest tasks by several at once. And it is honest about limits: where AI cannot help, the map says so.

The rest of the map

Same library, five ways in.

Copyright © LLOS.ai · 2026 — original pedagogy, voice, and design — all rights reserved.
Built on public evidence: O*NET®, ESCO, Wikipedia, U.S. Bureau of Labor Statistics, ILOSTAT. All sources & licenses