Ground Station Engineer

Ground Station Engineer handles primary responsibilities and this page shows 20 real tasks that reflect everyday required skills. Expect clear actions, typical interruptions, and outcomes that matter to clients. Each one shows where we found it, and comes with an AI prompt you can copy and use straight away.

20evidenced tasks
20ready prompts
10tools of the trade
17-2071.00O*NET-SOC code
198,750hold this job (US, BLS 2025)
$120,630median pay/yr (US)
Open Ground Station Engineer in the interactive atlas →

What it pays

Government survey numbers — not estimates, not ads.

Half of all Electrical Engineers in the U.S. earn more than $120,630 a year — the middle 80% land between $76,550 and $184,300. About 198,750 people in the U.S. do this work. Figures are for the U.S. occupation group “Electrical Engineers”. (U.S. Bureau of Labor Statistics survey, published 2025.) In India, Professionals earn about ₹38,298 a month on average — around ₹4.6 lakh a year (government PLFS survey via ILOSTAT, occupation-family figure).
$120,630typical pay / year
198,750people in this work
$184,300+top 10% earn
₹4.6 lakha year in India (family avg)
Think you get this job?Six quick questions on how it really works — with a hint and the reason behind every answer.
Test yourself →

The work, task by task

These are the real jobs-to-be-done, not a wish list. Each task shows where we found it, and the prompt underneath is written for that exact task.

Analysing5

Analyze electrical system requirements

+
Determine the ground station's electrical loads for the new antenna array, list peak and continuous currents,…
Determine the ground station's electrical loads for the new antenna array, list peak and continuous currents, required earthing and fault protection to meet UK safety regs, and produce a parts list with procurement priorities for next-quarter tender.
The tools that do the workLinuxjob descriptionsO*NET

Create circuit diagrams and models

+
Draft complete circuit diagrams and build component models for the antenna power distribution, include cable…
Draft complete circuit diagrams and build component models for the antenna power distribution, include cable sizing, protection devices, connector types and wiring harness layouts so installation crew can assemble without queries.
The tools that do the workDassault Systemes SolidWorksAutodesk AutoCADjob descriptionsWikipedia

Test electrical equipment and systems

+
Test the radar transmitter rack and associated power distribution panels, verify insulation resistance and…
Test the radar transmitter rack and associated power distribution panels, verify insulation resistance and correct interlock operation, log all measurements with pass/fail against the electrical checklist, and escalate any failures to maintenance with photos and timestamps today.
The tools that do the workLinuxESCOjob descriptionsO*NETWikipedia

Liaise with clients and project teams

+
Send a concise status note to AeroSat project leads and client contacts summarising current ground station…
Send a concise status note to AeroSat project leads and client contacts summarising current ground station availability, outstanding action items, the two‑week workplan, and propose a Friday conference call to resolve the antenna interface questions.
The tools that do the workBashjob descriptionsO*NETWikipedia

Perform detailed calculations for system design

+
Perform detailed power and link-budget calculations for the new antenna installation, document assumptions…
Perform detailed power and link-budget calculations for the new antenna installation, document assumptions and margin by sub-system, and produce a signed calculation pack for design review before Thursday's engineering meeting.
The tools that do the workC++job descriptionsO*NET
Coordinate1

Ensure projects meet safety standards

+
Audit the current project against the safety standard checklist, record non-conformances with evidence,…
Audit the current project against the safety standard checklist, record non-conformances with evidence, assign corrective actions to leads with deadlines, and file the completed safety report to the program compliance office by end of day Friday.
The tools that do the workApache Subversion SVNjob descriptionsWikipedia
The daily work14

Develop electrical power generation and distribution systems

+
Design the station's electrical power generation and distribution layout for the new antenna site, calculate…
Design the station's electrical power generation and distribution layout for the new antenna site, calculate load schedules and redundancy, specify generators, switchgear and cabling to meet UK safety regs, then produce construction-ready drawings and a cost estimate by next Wednesday.
The tools that do the workAutodesk AutoCADO*NETWikipedia

Evaluate systems and recommend repairs

+
Inspect the primary and backup power racks and distribution panels at Site 7, record measured voltages,…
Inspect the primary and backup power racks and distribution panels at Site 7, record measured voltages, harmonics and breaker trips, recommend specific repairs or replacements with part numbers and urgency ratings, and issue a repair instruction to procurement by Friday.
The tools that do the workLinuxjob descriptionsWikipedia

Research electronic devices and systems

+
Survey available RF front-end power supplies and telemetry converters, compare efficiency, MTBF and…
Survey available RF front-end power supplies and telemetry converters, compare efficiency, MTBF and compliance to our site environmental limits, shortlist three vendor models with pros, cons and procurement cost estimates for the technical review on Tuesday.
The tools that do the workDassault Systemes SolidWorksjob descriptionsWikipedia

Supervise or train project team members, as necessary.

+
Run a two-hour training session for junior engineers on safe isolation procedures, load shedding sequence and…
Run a two-hour training session for junior engineers on safe isolation procedures, load shedding sequence and emergency generator handover using the Site 3 single-line diagrams, hand out competency checklists and schedule one-on-one assessments next week.
The tools that do the workAutodesk RevitO*NET

Investigate or test vendors' or competitors' products.

+
Bench-test competing modem power modules for transient response, document measured startup currents, thermal…
Bench-test competing modem power modules for transient response, document measured startup currents, thermal rise and EMI performance, compare to our spec and write a vendor scorecard recommending acceptance, rejection or further testing by Thursday.
The tools that do the workEclipse IDEO*NET

Assist in developing capital project programs for new equipment or major repairs.

+
Draft the capital project brief for replacing the Site 2 UPS and diesel generator: define scope, safety…
Draft the capital project brief for replacing the Site 2 UPS and diesel generator: define scope, safety compliance steps, load growth assumptions, procurement timeline, estimated CAPEX and an approval milestone for the March board meeting.
The tools that do the workAutodesk AutoCAD Civil 3DO*NET

Ensure compliance with safety legislation

+
Review the site electrical layout, compare it against the 2019 workplace electrical safety regulations and…
Review the site electrical layout, compare it against the 2019 workplace electrical safety regulations and the site risk register, list every non-compliant item with clause references, recommended remedial action, estimated cost and who must sign off, then schedule the fixes before the next launch window.
The tools that do the workAutodesk AutoCADESCOsee the evidence ↗

Use a computer

+
Log into the station network, verify the telemetry server, power distribution unit and antenna controller are…
Log into the station network, verify the telemetry server, power distribution unit and antenna controller are reachable, capture system uptime, current load and error logs for the last 72 hours, and report anomalies with screenshots and suggested next steps.
The tools that do the workLinuxESCOsee the evidence ↗

Develop maintenance and testing procedures

+
Write step-by-step maintenance and test procedures for the 12kW transmitter rack, including daily warm-up…
Write step-by-step maintenance and test procedures for the 12kW transmitter rack, including daily warm-up checks, monthly RF alignment steps with pass/fail criteria, safety isolation steps that meet local electrical regs, and an equipment list with spare parts lead times.
The tools that do the workLinuxjob descriptions

Oversee technicians and craftspeople

+
Create a two-week supervision plan for the carousel of technicians and craft electricians for the H-pol…
Create a two-week supervision plan for the carousel of technicians and craft electricians for the H-pol antenna upgrade: daily task allocations, competency checks to run the cranes, safety brief content, and who signs off each completed task.
The tools that do the workEclipse IDEjob descriptions

Implement systems for remote operation and data transfer

+
Design the remote-operation and data-transfer system for the telemetry array: methods for secure remote…
Design the remote-operation and data-transfer system for the telemetry array: methods for secure remote login, automated data pull schedule, failure and retry logic, bandwidth limits, and test cases to validate end-to-end transfer to the archive.
The tools that do the workC++Bashjob descriptions

Apply principles of electromagnetism and electronics

+
Draft practical lab exercises and reference notes that demonstrate antenna near-field coupling, impedance…
Draft practical lab exercises and reference notes that demonstrate antenna near-field coupling, impedance matching, and filter behaviour, including expected measurements, circuit schematics, and safety warnings for bench testing.
The tools that do the workDassault Systemes SolidWorksWikipedia

Integrate electrical components into larger systems

+
Produce an integration checklist for fitting power supplies, surge protection and control I/O into the comms…
Produce an integration checklist for fitting power supplies, surge protection and control I/O into the comms shelter rack: mechanical mounting sequence, wiring diagrams with wire gauge and breaker settings, and EMC mitigation steps to verify after install.
The tools that do the workAutodesk AutoCADWikipedia

Supervise the procurement of mining electrical equipment

+
Prepare a procurement supervision brief for buying mining-grade switchgear: required specifications, safety…
Prepare a procurement supervision brief for buying mining-grade switchgear: required specifications, safety compliance tests to demand from suppliers, inspection plan on delivery, and approval gates before payment runs.
The tools that do the workESRI ArcGISESCO

Says who?

These are the pages we read to build this. Open any of them and check us.

The logs, files & records this job keeps

Shared with other careers — the same record means something different in each.

Related careers

Same family of work — each with its own tasks and prompts.

The LLOS Work Atlas is the world's largest evidenced task library — a map of human work, with a ready prompt behind every task. 1,774 careers · every task named by the sources that witnessed it — O*NET, ESCO, real job descriptions, Wikipedia — and the deepest tasks by several at once. And it is honest about limits: where AI cannot help, the map says so.

The rest of the map

Same library, five ways in.

Copyright © LLOS.ai · 2026 — original pedagogy, voice, and design — all rights reserved.
Built on public evidence: O*NET®, ESCO, Wikipedia, U.S. Bureau of Labor Statistics, ILOSTAT. All sources & licenses