km/h RPM

Metrology Engineer

Metrology Engineer handles the core on-the-job duties listed here and this page contains 23 real tasks you can try. Expect clear steps and real-world examples to show how work flows in Physics. Each one shows where we found it, and comes with an AI prompt you can copy and use straight away.

23evidenced tasks
23ready prompts
9tools of the trade
17-2051.00O*NET-SOC code
367,840hold this job (US, BLS 2025)
$100,840median pay/yr (US)
Open Metrology Engineer in the interactive atlas →

What it pays

Government survey numbers — not estimates, not ads.

Half of all Civil Engineers in the U.S. earn more than $100,840 a year — the middle 80% land between $68,240 and $163,220. About 367,840 people in the U.S. do this work. Figures are for the U.S. occupation group “Civil Engineers”. (U.S. Bureau of Labor Statistics survey, published 2025.) In India, Professionals earn about ₹38,298 a month on average — around ₹4.6 lakh a year (government PLFS survey via ILOSTAT, occupation-family figure).
$100,840typical pay / year
367,840people in this work
$163,220+top 10% earn
₹4.6 lakha year in India (family avg)
Think you get this job?Six quick questions on how it really works — with a hint and the reason behind every answer.
Test yourself →

The work, task by task

These are the real jobs-to-be-done, not a wish list. Each task shows where we found it, and the prompt underneath is written for that exact task.

Analysing3

Supervise site investigations

+
Supervise the site investigation at 42 Harbour Drive on Wednesday: confirm control point coordinates, verify…
Supervise the site investigation at 42 Harbour Drive on Wednesday: confirm control point coordinates, verify laser tracker setup and calibration, approve the survey sequence with the lead technician, and sign the site report before we leave at 16:30.
The tools that do the workESRI ArcGISjob descriptionsO*NETWikipedia

Evaluate and select appropriate construction materials

+
Decide materials for the new control station: compare stainless steel and aluminium sensor mounts for…
Decide materials for the new control station: compare stainless steel and aluminium sensor mounts for stiffness and thermal drift, check supplier datasheets, pick the supplier, and issue the purchase spec by Thursday.
The tools that do the workDassault Systemes SolidWorksO*NETWikipedia

Assess project risks

+
Run the project risk assessment for the coastal survey: list equipment failure, tidal access windows, data…
Run the project risk assessment for the coastal survey: list equipment failure, tidal access windows, data loss, and client schedule slip; rate likelihood and impact, propose mitigations, and circulate the risk register for sign-off.
The tools that do the workMicrosoft Exceljob descriptionsWikipedia
Keeping the record1

Prepare project bids

+
Prepare the bid for the Portside refurb by Friday: compile measured survey deliverables, itemise labour and…
Prepare the bid for the Portside refurb by Friday: compile measured survey deliverables, itemise labour and equipment hours, attach previous site tolerance reports, and produce a final cost summary I can approve.
The tools that do the workMicrosoft ExcelAdobe Acrobatjob descriptionsWikipedia
Convincing1

Liaise with clients

+
Contact Emma at Eastline Construction today to review the survey scope for their terminal expansion, explain…
Contact Emma at Eastline Construction today to review the survey scope for their terminal expansion, explain our tolerances and deliverable schedule, note any access constraints, and confirm a site meeting next Tuesday.
The tools that do the workMicrosoft Officejob descriptionsWikipedia
Protecting1

Ensure safety standards

+
Update the safety plan for upcoming tunnel scans: review the confined space permit, confirm PPE and rescue…
Update the safety plan for upcoming tunnel scans: review the confined space permit, confirm PPE and rescue standby with site safety officer, schedule a toolbox talk for Monday, and sign off on the revised permit before deployment.
The tools that do the workAdobe Acrobatjob descriptionsWikipedia
The daily work17

Conduct feasibility studies

+
Run feasibility checks on the proposed laser-tracking retrofit for Bay 3: confirm measurement tolerances,…
Run feasibility checks on the proposed laser-tracking retrofit for Bay 3: confirm measurement tolerances, floor flatness limits, required reference monuments, estimate instrument hours and cost, and deliver a decision memo to Marcos and the plant manager by Wednesday.
The tools that do the workMicrosoft Exceljob descriptionsO*NET

Design infrastructure blueprints

+
Produce construction-ready layout drawings for the new calibration lab showing datum monuments, benching,…
Produce construction-ready layout drawings for the new calibration lab showing datum monuments, benching, HVAC risers and access routes, include control point coordinates and a parts list, and issue the print set to procurement and facilities on Friday.
The tools that do the workAutodesk AutoCADjob descriptionsWikipedia

Develop or implement engineering solutions to clean up industrial accidents or other contaminated sites.

+
Design and document a containment and measurement plan for the solvent spill at Tank Field C: map instrument…
Design and document a containment and measurement plan for the solvent spill at Tank Field C: map instrument placement, sampling points, temporary benchmarks, required decontamination steps, and hand the mitigation plan to Environment and Safety and the site superintendent tomorrow morning.
The tools that do the workESRI ArcGISO*NET

Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications.

+
Calculate maximum allowable loads and stress margins for the new overhead crane support using measured anchor…
Calculate maximum allowable loads and stress margins for the new overhead crane support using measured anchor positions: produce span load tables, safety factors, and a one-page specification for purchasing and structural to review by Tuesday.
The tools that do the workDassault Systemes SolidWorksO*NET

Plan and design transportation or hydraulic systems or structures, using computer-assisted design or drawing tools.

+
Develop plan and profile designs for the drainage channel upgrade between Lot A and the service road, showing…
Develop plan and profile designs for the drainage channel upgrade between Lot A and the service road, showing grades, invert elevations, slope calculations, and control point coordinates, then circulate to civil and maintenance by Thursday.
The tools that do the workAutodesk AutoCAD Civil 3DO*NET

Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data.

+
Review the survey packet from GeoSurvey: check control network accuracy, reconcile coordinate sets with our…
Review the survey packet from GeoSurvey: check control network accuracy, reconcile coordinate sets with our site datum, flag discrepancies larger than 5 millimeters, mark missing metadata, and send annotated report back to Lisa and the surveyor today.
The tools that do the workBentley MicroStationO*NET
SOIL

Test soils or materials to determine the adequacy and strength of foundations, concrete, asphalt, or steel.

+
Test the compacted fill and cast concrete at Bay 3 and the southern pavement tie-in using plate bearing and…
Test the compacted fill and cast concrete at Bay 3 and the southern pavement tie-in using plate bearing and core tests, record moisture and density, compare against project spec Section 2.3, and flag any readings below 95% for immediate remediation.
The tools that do the workMicrosoft ExcelO*NET

Design or engineer systems to efficiently dispose of chemical, biological, or other toxic wastes.

+
Design a contained waste-treatment trench for Plant B to neutralize the recorded chemical effluent, size…
Design a contained waste-treatment trench for Plant B to neutralize the recorded chemical effluent, size liners and drain rates to meet the permit limits, produce material list and safety note for disposal contractors, and estimate construction cost and footprint under 200 square metres.
The tools that do the workAutodesk AutoCAD Civil 3DO*NET

Analyze survey data

+
Clean and import the latest total station and GPS survey logs for Grid 12, run least-squares adjustments,…
Clean and import the latest total station and GPS survey logs for Grid 12, run least-squares adjustments, produce coordinate residuals and an uncertainty table, and call out any points exceeding 10 millimetres for resurvey.
The tools that do the workMicrosoft ExcelESRI ArcGISjob descriptions

Prepare technical reports

+
Draft the technical report for Lot C pile testing: summarize objectives, include test logs, present…
Draft the technical report for Lot C pile testing: summarize objectives, include test logs, present stress–strain plots, list deviations from the method statement, and append photographic evidence and a clear recommendation by Thursday close of business.
The tools that do the workMicrosoft OfficeAdobe Acrobatjob descriptions

Oversee structure implementation

+
Visit the north gantry to verify erection matches the stamped shop drawings, confirm weld sequences and…
Visit the north gantry to verify erection matches the stamped shop drawings, confirm weld sequences and temporary bracing are in place, note deviations with photos and required corrective action, and sign off partial completion only if variance is under 5 millimetres.
The tools that do the workAutodesk Revitjob descriptions

Review design drawings

+
Review the supplier’s slab reinforcement drawing for Building D, check bar sizes, lap lengths and cover…
Review the supplier’s slab reinforcement drawing for Building D, check bar sizes, lap lengths and cover against spec, annotate noncompliant items with required revisions and return the marked drawing to the designer by Tuesday for reissue.
The tools that do the workBentley MicroStationjob descriptions

Monitor project progress

+
Report current measurement milestones for the turbine alignment project: compare actual completed surveys and…
Report current measurement milestones for the turbine alignment project: compare actual completed surveys and calibration logs against the baseline schedule, flag any tasks more than two days late, note which inspector and instrument caused delay, and send the summary to Raj in project control by Friday.
The tools that do the workMicrosoft ExcelMicrosoft Officejob descriptions

Analyze environmental impact

+
Map out the environmental sensor readings around the south test pad for the last month, calculate exceedances…
Map out the environmental sensor readings around the south test pad for the last month, calculate exceedances versus permit limits, highlight hotspots with coordinates and responsible subcontractor, and deliver the analysis and recommended mitigations to Lina in compliance by Wednesday.
The tools that do the workESRI ArcGISMicrosoft Exceljob descriptions

Develop repair plans

+
Draft the repair plan for the laser tracker that failed calibration: list required parts, step-by-step…
Draft the repair plan for the laser tracker that failed calibration: list required parts, step-by-step corrective actions, estimated downtime, safety checks, responsible technician (Samir), and the cost estimate so procurement can approve the purchase order by next Monday.
The tools that do the workDassault Systemes SolidWorksMicrosoft Officejob descriptions

Operate infrastructure systems effectively

+
Produce an operations checklist to keep the alignment bench and environmental controls within spec: include…
Produce an operations checklist to keep the alignment bench and environmental controls within spec: include daily instrument warm-up, humidity and temperature setpoints, calibration intervals, who to call for deviations, and circulate it to the shift leads with an attachment of the latest bench layout.
The tools that do the workAutodesk AutoCADMicrosoft OfficeWikipedia

Protect public and environmental health during projects

+
Prepare a health-and-safety briefing for the upcoming field calibration campaign that identifies dust and…
Prepare a health-and-safety briefing for the upcoming field calibration campaign that identifies dust and solvent exposure risks, required PPE, spill containment steps, emergency contacts, and the environmental monitoring points to be logged; send to the site manager and safety officer before the pre-mobilisation meeting.
The tools that do the workAdobe AcrobatWikipedia

Says who?

These are the pages we read to build this. Open any of them and check us.

Activities this job lives in

The human activities behind the tasks — each with its honest AI ceiling.

The logs, files & records this job keeps

Shared with other careers — the same record means something different in each.

Related careers

Same family of work — each with its own tasks and prompts.

The LLOS Work Atlas is the world's largest evidenced task library — a map of human work, with a ready prompt behind every task. 1,774 careers · every task named by the sources that witnessed it — O*NET, ESCO, real job descriptions, Wikipedia — and the deepest tasks by several at once. And it is honest about limits: where AI cannot help, the map says so.

The rest of the map

Same library, five ways in.

Copyright © LLOS.ai · 2026 — original pedagogy, voice, and design — all rights reserved.
Built on public evidence: O*NET®, ESCO, Wikipedia, U.S. Bureau of Labor Statistics, ILOSTAT. All sources & licenses