◆ MATLAB

Perform Simulink physical modeling

This is real work, not a feature someone invented — it comes from real job ads and real questions people asked. Below are four ready AI prompts: get it done, make it easy for the next person to say yes to, work out the right move when you are stuck, and stop it coming back.

4prompts
See the prompt↓All MATLAB tasks

The same task, four prompts

today's deadline · the next reviewer · the stuck moment · the pattern
AExecute — do the immediate taskBuild a Simulink physical model of the new active suspension system for the off-road vehicle.…+
Build a Simulink physical model of the new active suspension system for the off-road vehicle. Include the hydraulic actuators and the spring-damper elements, and make sure it can simulate the vehicle's response to a 10cm bump at 30 km/h. I need the initial model by Friday.
when the reply comes backPush once: ask it to sharpen the weakest part, and to say what it assumed. Helpful?
BImprove — make it easier to acceptBefore I share this physical model of the robotic arm with the controls team, make it easy for…+
Before I share this physical model of the robotic arm with the controls team, make it easy for them to integrate their algorithms. Can you ensure all key interfaces are clearly defined, provide a simplified linear equivalent for initial controller tuning, and flag any non-linearities that might complicate their control design?
when the reply comes backPush once: ask it to sharpen the weakest part, and to say what it assumed. Helpful?
CDecide — diagnose the stuck momentI've been working on the Simulink physical model for the quadcopter's flight dynamics, and…+
The Simulink model of the quadcopter is exhibiting unexpected oscillations at certain flight conditions, and I can't figure out the source.
I've been working on the Simulink physical model for the quadcopter's flight dynamics, and under certain aggressive maneuvers, the model is showing sustained, unexpected oscillations in pitch and roll. I'm concerned this indicates a fundamental instability or a modeling error in the aerodynamics or motor dynamics. I'm afraid this will delay our flight tests. What's the most likely cause, and what's the fastest way to pinpoint the source of these oscillations before the design review on Monday?
when the reply comes backPush once: ask it to sharpen the weakest part, and to say what it assumed. Helpful?
DBecome — change the patternI often find myself manually tweaking dozens of parameters in my Simulink physical models to…+
I frequently spend too much time tuning parameters in complex physical models to match experimental data.
I often find myself manually tweaking dozens of parameters in my Simulink physical models to try and get them to match experimental test data, which is incredibly time-consuming and often leads to sub-optimal fits. This process feels inefficient and lacks rigor. What habit should I change to streamline the parameter tuning and model calibration process, ensuring my models are more accurately aligned with real-world behavior without endless manual iteration?
when the reply comes backPush once: ask it to sharpen the weakest part, and to say what it assumed. Helpful?

Questions people actually ask

honest answers, no sign-up

Every task here was seen in the real world. Someone doing the job named it, a real job ad asked for it, or a lot of people asked about it online.

If nothing real showed a task, it is not on the page. That is the whole rule.

They are the same job approached four ways, because what you need depends on where you are.

Get it done today. Make it easy for the next person to say yes to. Work out the right move when you are stuck. Learn the pattern so the job stops coming back.

For most of these jobs it can carry the heavy thinking - draft it, sort it, check it, rehearse it with you.

It cannot sit in your chair, take the blame when a number is wrong, or notice what nobody wrote down. Let it do the first 80%. Keep the last 20% that is truly yours.

No. Copy any prompt and paste it into the AI you already use. No account, no score, no wall in the way.

Any of them. The prompts describe the work rather than naming a product, so they are not tied to one assistant.

That is also why they keep working when you switch.

Change it freely. Every prompt is a starting line, not a rule.

Put in your real numbers, your real names and your real deadline. The more you make it yours, the better the answer comes back.

The tasks come from real job ads, published job data and the questions people ask in public forums.

The steps come from MATLAB's own documentation, with practitioner sources for the traps the manual does not mention.

Push once. Ask it to sharpen the weakest part and to say what it assumed.

Most wrong answers come from a missing detail rather than a bad prompt - tell it the thing it could not know.