Electrician

Electrician solves client problems and this page contains 22 real tasks that reflect common issues you’ll resolve. Each entry notes who’s involved, how long it takes, and the expected result. Each one shows where we found it, and comes with an AI prompt you can copy and use straight away.

22evidenced tasks
22ready prompts
7tools of the trade
47-2111.00O*NET-SOC code
757,220hold this job (US, BLS 2025)
$63,190median pay/yr (US)
Open Electrician in the interactive atlas →

What it pays

Government survey numbers — not estimates, not ads.

Half of all Electricians in the U.S. earn more than $63,190 a year — the middle 80% land between $42,640 and $108,510. About 757,220 people in the U.S. do this work. Figures are for the U.S. occupation group “Electricians”. (U.S. Bureau of Labor Statistics survey, published 2025.) In India, Craft and related trades workers earn about ₹16,825 a month on average — around ₹2.0 lakh a year (government PLFS survey via ILOSTAT, occupation-family figure).
$63,190typical pay / year
757,220people in this work
$108,510+top 10% earn
₹2.0 lakha year in India (family avg)
Think you get this job?Six quick questions on how it really works — with a hint and the reason behind every answer.
Test yourself →

The work, task by task

These are the real jobs-to-be-done, not a wish list. Each task shows where we found it, and the prompt underneath is written for that exact task.

Fixing3

Install electrical wiring and fixtures

+
Install the new circuit run for the kitchen renovation: route NM cable from panel L1, staple and protect…
Install the new circuit run for the kitchen renovation: route NM cable from panel L1, staple and protect through studs, splice and pigtail to the new four-gang switched outlet, and test each branch for correct polarity and grounding before closing walls.
The tools that do the workMicrosoft Exceljob descriptionsO*NETWikipedia

Install data and cable lines

+
Pull and terminate Cat6 runs from IDF room 2 to the second-floor office bank, label both ends with room and…
Pull and terminate Cat6 runs from IDF room 2 to the second-floor office bank, label both ends with room and jack numbers, test for continuity and NEXT, repair any failed pairs, and update the cable schedule by Friday morning.
The tools that do the workAutodesk AutoCADMicrosoft ExcelESCOjob descriptionsWikipedia

Assemble conduits and connect wiring

+
Fit and secure metal conduits along the specified routes, fish and route the cable bundles, make…
Fit and secure metal conduits along the specified routes, fish and route the cable bundles, make code-compliant terminations inside junction boxes, tighten all connections to torque spec and leave labelled cable tags and a photo record on the site folder before quitting time.
The tools that do the workCraftsman CD Estimatorjob descriptionsO*NET
Analysing2

Inspect electrical components

+
Inspect the panel room and verify each circuit breaker, contactor, junction box and terminal strip against…
Inspect the panel room and verify each circuit breaker, contactor, junction box and terminal strip against the electrical schedule, note missing or damaged components, photograph defects, and file a signed inspection report by Wednesday noon.
The tools that do the workMicrosoft ExcelESCOjob descriptions

Read technical diagrams and blueprints

+
Compare the site wiring diagrams to the as-built drawings at the main distribution board, mark any routing…
Compare the site wiring diagrams to the as-built drawings at the main distribution board, mark any routing differences and unclear symbol calls, annotate the blueprint with measured cable lengths, and deliver the annotated prints to the project engineer before end of day Thursday.
The tools that do the workAutodesk AutoCADjob descriptionsO*NET
The daily work17

Execute wiring plans

+
Follow the lighting and power wiring plan to pull, terminate and label all conductors for the north wing…
Follow the lighting and power wiring plan to pull, terminate and label all conductors for the north wing circuits, complete all splices with heat-shrink insulated connectors, test continuity and insulation, then update the circuit log and hand the electrician foreman a signed completion sheet by 5pm today.
The tools that do the workConstruction Master Projob descriptionsWikipedia

Maintain electrical systems

+
Walk the building's main distribution rooms, inspect panels, breakers and visible wiring for overheating,…
Walk the building's main distribution rooms, inspect panels, breakers and visible wiring for overheating, corrosion or loose terminations, tag defects, photograph each with location notes, and produce a one-page maintenance memo for the facilities manager by Friday.
The tools that do the workMicrosoft Wordjob descriptionsO*NET

Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures, using hand tools or power tools.

+
Assemble and bench-test the replacement junction box and three run leads to the lighting circuits, install…
Assemble and bench-test the replacement junction box and three run leads to the lighting circuits, install conduit and secure cable splices on-site, verify continuity and polarity, then energize the circuit and log test readings in the site log before signing off with the site supervisor today.
The tools that do the workConstruction Master ProO*NET

Install ground leads and connect power cables to equipment, such as motors.

+
Mount the motor's ground lug, route and clamp the incoming power cables, make the power and ground…
Mount the motor's ground lug, route and clamp the incoming power cables, make the power and ground terminations to the motor terminals per the wiring diagram, megger the completed feed, and note resistance and torque readings in the equipment file before handover to operations.
The tools that do the workAutodesk AutoCADO*NET

Advise management on whether continued operation of equipment could be hazardous.

+
Inspect the faulty conveyor drive, assess whether continued operation presents a hazard, list observed…
Inspect the faulty conveyor drive, assess whether continued operation presents a hazard, list observed defects and measured insulation and leakage values, and recommend immediate actions for the production manager by shift end.
The tools that do the workMicrosoft WordO*NET

Construct or fabricate parts, using hand tools, according to specifications.

+
Fabricate the custom mounting plate and four terminal lugs to the shop drawing, deburr and plate as…
Fabricate the custom mounting plate and four terminal lugs to the shop drawing, deburr and plate as specified, assemble the parts, and deliver the finished component with a one-line fit check record to the foreman tomorrow morning.
The tools that do the workConstruction Master ProO*NET

Perform business management duties, such as maintaining records or files, preparing reports, or ordering supplies or equipment.

+
Update the service ledger with this month's call-outs, list parts used and labor hours, raise purchase…
Update the service ledger with this month's call-outs, list parts used and labor hours, raise purchase requests for low-stock fuses and conduit, and export a two-page monthly maintenance report for the operations director by Monday.
The tools that do the workMicrosoft ExcelMicrosoft OutlookO*NET

Fasten small metal or plastic boxes to walls to house electrical switches or outlets.

+
Fasten two single-gang metal and one dual-gang plastic outlet boxes at the kitchen south wall studs, level…
Fasten two single-gang metal and one dual-gang plastic outlet boxes at the kitchen south wall studs, level and set depth flush with the finished drywall, secure with three screws each, and confirm mounting will clear the wiring chase before leaving.
The tools that do the workAutodesk AutoCADO*NET

Perform physically demanding tasks, such as digging trenches to lay conduit or moving or lifting heavy objects.

+
Dig a 30-foot trench from the meter pad to the garage footer to lay 1-inch conduit, keep trench depth at 18…
Dig a 30-foot trench from the meter pad to the garage footer to lay 1-inch conduit, keep trench depth at 18 inches, hand-dig under the sprinkler line, lift and move the concrete sleeve with two crew members, and backfill to grade with warning tape on top of conduit.
The tools that do the workConstruction Master ProO*NET

Provide assistance during emergencies by operating floodlights or generators, placing flares, or driving needed vehicles.

+
Respond to the hospital outage: set up two 1000W floodlights, start and load the portable generator, run…
Respond to the hospital outage: set up two 1000W floodlights, start and load the portable generator, run temporary feed to the emergency panel with properly rated leads, place warning flares at the driveway, and log hours and fuel used for the shift report.
The tools that do the workMicrosoft WordO*NET

Ensure safety compliance

+
Walk the third-floor mechanical room with the site safety officer, verify all panels have covers and lockout…
Walk the third-floor mechanical room with the site safety officer, verify all panels have covers and lockout tags, record missing PPE or blocked egress, take photos of any unsafe splices, and produce a signed compliance note for facilities before end of day.
The tools that do the workMicrosoft Outlookjob descriptions

Replace old wiring and cables

+
Remove the old cloth-insulated feeder in the attic, pull new THHN in conduit sized per plan, splice at the…
Remove the old cloth-insulated feeder in the attic, pull new THHN in conduit sized per plan, splice at the existing junction box with proper wire nuts and heat shrink, label both ends, test continuity and insulation resistance, and update the circuit schedule on site.
The tools that do the workMicrosoft Exceljob descriptions

Inspect transformers and circuit breakers

+
Inspect the substation transformer and adjacent breakers: verify oil level and gauge readings, check for…
Inspect the substation transformer and adjacent breakers: verify oil level and gauge readings, check for overheating, exercise each breaker three times under supervision, record serial numbers and test results, and file the inspection report with maintenance by tomorrow morning.
The tools that do the workMicrosoft Wordjob descriptions

Wire ships, airplanes, and mobile platforms

+
Run the wiring for the engine room, avionics bay, and aft hab—route and secure armored cable, label every…
Run the wiring for the engine room, avionics bay, and aft hab—route and secure armored cable, label every splice and junction, test continuity and insulation resistance, then hand the as-built wiring diagram and test log to Chief Engineer before shift end Thursday.
The tools that do the workAutodesk AutoCADWikipedia

Work on electric utility distribution systems at high voltages

+
Isolate the feeder, install and torque the new high-voltage splice kits on pole 7, re-energise through the…
Isolate the feeder, install and torque the new high-voltage splice kits on pole 7, re-energise through the sectionaliser, record phase voltages and fault indicators, and upload the incident report to the utility supervisor by 20:00.
The tools that do the workMicrosoft ExcelWikipedia

Demonstrate or study principles of electricity

+
Set up the bench demo of series and parallel circuits using the training board, wire the resistors, lamps and…
Set up the bench demo of series and parallel circuits using the training board, wire the resistors, lamps and ammeter, run students through measurements of voltage, current and resistance, and save the measured values and photos in the lesson file for tomorrow's lab.
The tools that do the workMicrosoft WordWikipedia

Maintain electrical infrastructures and domestic machinery

+
Walk the building electrical risers, inspect panelboard torque, replace the worn contactor in the laundry…
Walk the building electrical risers, inspect panelboard torque, replace the worn contactor in the laundry room machine, re-splice the damaged feeder with heat-shrink kits, then produce a maintenance report with parts used and next inspection date for facilities.
The tools that do the workAdobe AcrobatESCO

Says who?

These are the pages we read to build this. Open any of them and check us.

Activities this job lives in

The human activities behind the tasks — each with its honest AI ceiling.

The logs, files & records this job keeps

Shared with other careers — the same record means something different in each.

Related careers

Same family of work — each with its own tasks and prompts.

The LLOS Work Atlas is the world's largest evidenced task library — a map of human work, with a ready prompt behind every task. 1,774 careers · every task named by the sources that witnessed it — O*NET, ESCO, real job descriptions, Wikipedia — and the deepest tasks by several at once. And it is honest about limits: where AI cannot help, the map says so.

The rest of the map

Same library, five ways in.

Copyright © LLOS.ai · 2026 — original pedagogy, voice, and design — all rights reserved.
Built on public evidence: O*NET®, ESCO, Wikipedia, U.S. Bureau of Labor Statistics, ILOSTAT. All sources & licenses