What it pays
Government survey numbers — not estimates, not ads.
Half of all Electro-Mechanical and Mechatronics Technologists and Technicians in the U.S. earn more than $73,900 a year — the middle 80% land between $47,840 and $109,890. About 15,520 people in the U.S. do this work. Figures are for the U.S. occupation group “Electro-Mechanical and Mechatronics Technologists and Technicians”. (U.S. Bureau of Labor Statistics survey, published 2025.) In India, Professionals earn about ₹38,298 a month on average — around ₹4.6 lakh a year (government PLFS survey via ILOSTAT, occupation-family figure).
$73,900typical pay / year
15,520people in this work
$109,890+top 10% earn
₹4.6 lakha year in India (family avg)
Think you get this job?Six quick questions on how it really works — with a hint and the reason behind every answer.
Test yourself →The work, task by task
These are the real jobs-to-be-done, not a wish list. Each task shows where we found it, and the prompt underneath is written for that exact task.
Fixing1
Replace faulty electronic and mechanical parts
+Replace the faulty motor assembly on Rack B this morning: isolate power, remove the damaged gearbox and worn…
Replace faulty electronic and mechanical parts
+Replace the faulty motor assembly on Rack B this morning: isolate power, remove the damaged gearbox and worn bearings, fit the new motor kit, run the alignment and three-cycle functional test, and log the parts replaced and test results in the maintenance record.
The tools that do the workMicrosoft WordLinuxjob descriptionsO*NETWikipedia
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Keeping the record3
Test EM games to ensure proper functioning
+Test the electromagnetic control modules for the growth lights tonight: run the factory diagnostics, record…
Test EM games to ensure proper functioning
+Test the electromagnetic control modules for the growth lights tonight: run the factory diagnostics, record voltage and frequency under three load profiles, flag any module that drifts beyond tolerance, and attach waveform screenshots to the test summary for engineering review tomorrow.
The tools that do the workPythonMicrosoft Exceljob descriptionsO*NETWikipedia
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Assist engineers in testing robotics equipment
+Join the engineers on the greenhouse floor this morning to run the robotic tray lifter diagnostics, log motor…
Assist engineers in testing robotics equipment
+Join the engineers on the greenhouse floor this morning to run the robotic tray lifter diagnostics, log motor currents and vibration readings, flag any safety breaches with banned-material labels, and write a short fault list with recommended fixes by 4pm.
The tools that do the workLinuxMicrosoft ExcelESCOjob descriptionsO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Prepare documents detailing the assembly process and other technical specifications
+Draft the assembly packet for the new vertical rail gantry: include step-by-step mechanical assembly, torque…
Prepare documents detailing the assembly process and other technical specifications
+Draft the assembly packet for the new vertical rail gantry: include step-by-step mechanical assembly, torque specs for each electric motor, wiring harness routing, banned-material compliance notes, and a one-page spare parts list before Friday's build meeting.
The tools that do the workMicrosoft WordAutodesk AutoCADESCOO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Make1
Develop, test, or program new robots.
+Take the prototype chassis, load the new motion routines, run the calibration sequence, record servo response…
Develop, test, or program new robots.
+Take the prototype chassis, load the new motion routines, run the calibration sequence, record servo response curves and failure modes, iterate the code until acceleration profiles meet plant-handling tolerances, and push the working build to the engineers with a test report.
The tools that do the workC++Pythonjob descriptionsO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
The daily work18
Install or program computer hardware or machine or instrumentation software in microprocessor-based systems.
+Install and configure the new microcontroller board, wire the motor driver and sensors to the control…
Install or program computer hardware or machine or instrumentation software in microprocessor-based systems.
+Install and configure the new microcontroller board, wire the motor driver and sensors to the control harness, flash the firmware image, run the boot diagnostics till the CAN bus shows all nodes healthy, and log serial output if any fault persists.
The tools that do the workLinuxO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Inspect parts for surface defects.
+Inspect the last production batch of vertical rack brackets and LED mounts under 10x magnification, flag any…
Inspect parts for surface defects.
+Inspect the last production batch of vertical rack brackets and LED mounts under 10x magnification, flag any stress cracks, corrosion or burrs, photograph defects with scale, and add failing serial numbers to the nonconforming parts list for review.
The tools that do the workMicrosoft WordO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments.
+Measure the drive sprocket, shaft journal and spacer clearances on the recently assembled actuator using…
Verify part dimensions or clearances to ensure conformance to specifications, using precision measuring instruments.
+Measure the drive sprocket, shaft journal and spacer clearances on the recently assembled actuator using micrometer and feeler gauges, record actuals against the drawing tolerances, reject any part outside plus or minus 0.05 millimetres and notify maintenance.
The tools that do the workMicrosoft ExcelO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Establish and maintain inventory, records, or documentation systems.
+Update the spare parts inventory with received pumps, fans and controller modules, add serial numbers, shelf…
Establish and maintain inventory, records, or documentation systems.
+Update the spare parts inventory with received pumps, fans and controller modules, add serial numbers, shelf locations and purchase dates, reconcile against the bin counts and produce a reorder list for items below the two-week supply threshold.
The tools that do the workMicrosoft AccessMicrosoft ExcelO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Determine whether selected electromechanical components comply with environmental standards and regulations.
+Check the selected motor, gearbox and coating supplier datasheets for RoHS and REACH compliance, compare…
Determine whether selected electromechanical components comply with environmental standards and regulations.
+Check the selected motor, gearbox and coating supplier datasheets for RoHS and REACH compliance, compare declared substances to the banned-materials list, document any noncompliant entries and escalate procurement for alternatives if found.
The tools that do the workMicrosoft WordO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Develop or implement programs related to the environmental impact of engineering activities.
+Develop the site emissions tracking script to ingest weekly energy and coolant usage, calculate scope one and…
Develop or implement programs related to the environmental impact of engineering activities.
+Develop the site emissions tracking script to ingest weekly energy and coolant usage, calculate scope one and two equivalents using our conversion factors, output a monthly environmental-impact CSV and generate a summary for the sustainability lead.
The tools that do the workPythonO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Install and set up EM game components and systems
+Install and set up the EM game components and systems in Rack B, wire the drives and motor controllers to the…
Install and set up EM game components and systems
+Install and set up the EM game components and systems in Rack B, wire the drives and motor controllers to the existing power bus, verify grounding and banned-material compliance, then run the initial power-up sequence and report any faults to maintenance by end of day Friday.
The tools that do the workLinuxPythonWikipedia
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Calibrate sensors and targets in light gun and simulation games
+Calibrate the light-gun and simulation game sensors in Bay 3, align targets to the optical fixtures, record…
Calibrate sensors and targets in light gun and simulation games
+Calibrate the light-gun and simulation game sensors in Bay 3, align targets to the optical fixtures, record sensor offsets and gain settings, run three validation runs at varying light levels and hand the calibration sheet to operations before the afternoon shift change.
The tools that do the workPythonWikipedia
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Document maintenance procedures and repairs performed
+Document the maintenance procedures and repairs I performed on Tower 2 pumps today, list parts replaced,…
Document maintenance procedures and repairs performed
+Document the maintenance procedures and repairs I performed on Tower 2 pumps today, list parts replaced, torques used, test readings before and after, safety steps taken for banned-material avoidance, and upload the final maintenance report to the asset folder by 18:00.
The tools that do the workMicrosoft WordMicrosoft ExcelWikipedia
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Make draughts and prepare documents detailing the material requisitions
+Make draughts and prepare the material requisition documents for next week's replaceable motor mounts,…
Make draughts and prepare documents detailing the material requisitions
+Make draughts and prepare the material requisition documents for next week's replaceable motor mounts, include part numbers, quantities, supplier lead times and the cost estimate, then circulate the requisition to procurement and the production foreman for sign-off on Thursday.
The tools that do the workMicrosoft ExcelMicrosoft WordESCO
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Test and evaluate the prototypes
+Test and evaluate the new prototype grow-light fixture on Bench A: run thermal and vibration cycles, measure…
Test and evaluate the prototypes
+Test and evaluate the new prototype grow-light fixture on Bench A: run thermal and vibration cycles, measure luminous output and power draw, log anomalies, compare results to the spec sheet and deliver a one-page verdict to R&D by Monday morning.
The tools that do the workDassault Systemes SolidWorksMicrosoft ExcelESCO
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Oversee the manufacturing process
+Oversee the manufacturing process on the evening shift: walk the line for machine setup, confirm torque and…
Oversee the manufacturing process
+Oversee the manufacturing process on the evening shift: walk the line for machine setup, confirm torque and alignment checks are completed, ensure banned-material controls are enforced, log any rejects and send a shift summary to production management before midnight.
The tools that do the workMicrosoft OutlookESCO
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
+Run a cost-comparison study for our two rack designs over a three-year production horizon, pulling actual…
Conduct statistical studies to analyze or compare production costs for sustainable and nonsustainable designs.
+Run a cost-comparison study for our two rack designs over a three-year production horizon, pulling actual yield, labor hours, energy use and material invoices from the last 12 months, calculate per-kilo cost with sensitivity to energy price changes, and produce a one-page recommendation for the farm manager by next Wednesday.
The tools that do the workMicrosoft ExcelO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Specify, coordinate, or conduct quality-control or quality-assurance programs and procedures.
+Set up a quality program to track germination rate, pest incidence, nutrient variances and mechanical failure…
Specify, coordinate, or conduct quality-control or quality-assurance programs and procedures.
+Set up a quality program to track germination rate, pest incidence, nutrient variances and mechanical failure rates for the new vertical trays, define sampling frequency and acceptance criteria, assign daily checks to Sam in maintenance and weekly QA reviews to Priya in operations, and deliver the SOP and checklist by Friday.
The tools that do the workMicrosoft WordMicrosoft ExcelO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
+Make the fittings and two prototype bracket housings from 3-mm stainless sheet, add two locating tabs and a…
Operate metalworking machines to fabricate housings, jigs, fittings, or fixtures.
+Make the fittings and two prototype bracket housings from 3-mm stainless sheet, add two locating tabs and a tapped M6 boss, log material batch numbers, record machine settings and cycle times, and hand the three finished parts plus a short fabrication log to Miguel in maintenance before end of day Thursday.
The tools that do the workDassault Systemes SolidWorksO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Identify energy-conserving production or fabrication methods, such as by bending metal rather than cutting and welding or casting metal.
+Survey our current fabrication steps for rack uprights and produce three energy-saving alternatives that…
Identify energy-conserving production or fabrication methods, such as by bending metal rather than cutting and welding or casting metal.
+Survey our current fabrication steps for rack uprights and produce three energy-saving alternatives that reduce cutting or welding—prefer bending, nesting, or common blanks—estimate energy and labor savings for each option, and present the chosen option with implementation risks to operations on Monday.
The tools that do the workAutodesk AutoCADO*NET
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Adjust unmanned, automated, servomechanical, or electromechanical systems
+Adjust the nutrient dosing pumps and conveyor servo gains to eliminate the oscillation seen on bay C, record…
Adjust unmanned, automated, servomechanical, or electromechanical systems
+Adjust the nutrient dosing pumps and conveyor servo gains to eliminate the oscillation seen on bay C, record the new PID settings and current draw before and after, run a 24-hour monitoring log, and report any alarms to Priya with suggested follow-ups by tomorrow morning.
The tools that do the workLinuxPythonjob descriptions
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Troubleshoot electrical and mechanical issues in EM games
+Diagnose the intermittent power trips in the EM test rig by insulating and continuity checks on the wiring…
Troubleshoot electrical and mechanical issues in EM games
+Diagnose the intermittent power trips in the EM test rig by insulating and continuity checks on the wiring harness, swapping the suspect motor with a known-good unit, logging voltages and fault codes during a test sequence, and summarise findings and recommended repairs for Miguel by end of shift.
The tools that do the workMicrosoft WordWikipedia
Pasted it? Good. When the reply comes back, push once: ask it to sharpen the weakest part. — Did this prompt help?
Says who?
These are the pages we read to build this. Open any of them and check us.
The logs, files & records this job keeps
Shared with other careers — the same record means something different in each.
Related careers
Same family of work — each with its own tasks and prompts.
The LLOS Work Atlas is the world's largest evidenced task library — a map of human work, with a ready prompt behind every task. 1,774 careers · every task named by the sources that witnessed it — O*NET, ESCO, real job descriptions, Wikipedia — and the deepest tasks by several at once. And it is honest about limits: where AI cannot help, the map says so.
The rest of the map
Same library, five ways in.
Copyright © LLOS.ai · 2026 — original pedagogy, voice, and design — all rights reserved.
Built on public evidence: O*NET®, ESCO, Wikipedia, U.S. Bureau of Labor Statistics, ILOSTAT. All sources & licenses
Built on public evidence: O*NET®, ESCO, Wikipedia, U.S. Bureau of Labor Statistics, ILOSTAT. All sources & licenses